Home DIY : Categories : Hand Tools : Masonry Tools : Bricklayers Chisels

Shop Categories

...Masonry Tools

Hyde Mfg. 45600 Pry Bar And Scraper

Hyde Mfg.

Used to remove molding, open boxes, scrape paint, and pull nails. High carbon steel, hardened and tempered. Ground scraping end. Nail slot. Tool measures 9 1 2" overall.
1/2" x 11 Hard Cap Star Drill

Baltimore Tool Works, Inc

Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.
1-3/4" x 8-1/2" Hard Cap Mason's Chisel

Baltimore Tool Works, Inc

Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.
1 1/8" X 3" Carbide Offset Hand Set

Trow and Holden Company

Place the blade against the trim line and angle back slightly before striking. The flat edge means there is no angle to nick the edge of the stone. Always wear safety glasses.
SOFT STONE HAND CARVING SET WITH ROUND HAMMER

Trow and Holden Company

This set contains a 1 1/2 lb. Round Hammer and five carbide tipped chisels: 1/2" Hand Point, 3/8" Hand Chisel, 1/2" Hand Chisel with optional teeth, 3/4" Mallet Head Chisel, and 1 1/4" Mallet Head Chisel, all wrapped in a Trow & Holden Tool Apron. All tools manufactured at our factory in Vermont. Always wear safety glasses.
3/4" Carbide Hand Point

Trow and Holden Company

Use this important tools to take down high spots before using other carbide-tipped tools, since wider blades must come in full contact with the stone. Use a Point to rough out and shape as well. Always wear safety glasses.
HARD STONE HAND CARVING SET WITH ROUND HAMMER

Trow and Holden Company

This set contains a 1 1/2 lb. Round Hammer and five carbide tipped chisels: 1/2" Hand Point, 3/8" Hand Chisel, 1/2" Hand Chisel with optional teeth, 3/4" Mallet Head Chisel, and 1 1/4" Mallet Head Chisel, all wrapped in a Trow & Holden Tool Apron. All tools manufactured at our factory in Vermont. Always wear safety glasses.
3/16" x 10" Hard Cap Joint Chisel

Baltimore Tool Works, Inc

Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.
DASCO 3635-0 STAR DRILL 1/2" X 12"

DASCO

"DASCO" STAR DRILL Targethead High carbon steel Peggable pouch 12", 1/2" Point
Brick Chisel W Hand Grip

Marshalltown

4-1/2" handle with comfortable rubber grip.
Perfect for removing floor tile or wall tile, stone.
Forged from highest carbon steel hardened and tempered. 8-3/4" x 4".
1 1/8" X 3" Carbide Hand Tracer

Trow and Holden Company

The carbide tip Hand Tracer is used for splitting stone or for scoring stone in preparation for trimming or splitting. The carbide blade will retain its shape many times longer than steel, and with proper care will last for years. Specially tempered for use with the Trow & Holden Hand Hammer or Round Hammer. Always wear safety glasses.
3/4" Carbide Hand Chisel

Trow and Holden Company

This traditional carbide hand chisel, for use on granite and softer stone, is made from the highest quality materials at our factory in Barre, Vermont, USA. Always wear safety glasses.
1" X 2" Carbide Hand Set

Trow and Holden Company

This stone trimming tools is made with the very best carbide to hold its shape. Place trimming edge on your score line and angle back slightly before striking. When your edge gets dull, turn it over and use the other side. Blade must come in full contact with the stone. Always wear safety glasses.
1 1/4" Carbide Heavy Hand Point

Trow and Holden Company

Use this important tools to take down high spots before using other carbide-tipped tools, since wider blades must come in full contact with the stone. Use a Point to rough out and shape as well. Always wear safety glasses.
3-1/2" Hard Cap Brick Set

Baltimore Tool Works, Inc

Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.
2-1/4" X 8-1/2" Hard Cap Mason's Chisel

Baltimore Tool Works, Inc

Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.
Campbell Hausfeld Factory-Reconditioned Short Barrel Pneumatic Air Hammer

Campbell Hausfeld

Includes Air Chisel - TL100300RB.
2" Carbide Mallet Head Chisel with 5/8" stock.

Trow and Holden Company

These classic hand carving chisels are made of the most durable steel and carbide, so you can work longer, with less maintenance! Remember, always wear safety glasses.
Carbide Tipped Hand Set, 1" Stock, 1 1/8" Blade Width

Trow and Holden

This stone trimming tools is made with the very best carbide to hold its shape. Place trimming edge on your score line and angle back slightly before striking. When your edge gets dull, turn it over and use the other side. Blade must come in full contact with the stone. Always wear safety glasses.
1" x 12" Hard Cap Masonry Chisel

Baltimore Tool Works, Inc

Features and Benefits: Hard Cap has reinvented the struck tool by adding an unbreakable reinforced polymer cap and oil-resistant cushion grip. The result - tools that are safer, more accurate and comfortable to use. Unbreakable, tough, reinforced polymer cap, 2-1/2 times the striking surface of a standard chisel - eliminates flying chips and mushrooming of chisel head; four cap diameters to match hammer sizes Comfortable grip reduces shock by up to 90%; oil and solvent resistant reduces hot/cold feel, enhances gripping ability. Noise level reduced by up to 80%. Hammer kickback and wrist-elbow trauma is minimized. The industrys sharpest and most accurate cutting edge Made in the U.S.A.