Shop Categories
- Spreader Clamps
- Tire Safety
- HVLP Sprayers
- Metabo
- Vacuums & Dust Collectors
- Table Saw
- All Saw Blades
- Porter-Cable
- V Idlers
- Garage Doors
- Screwdrivers
- Replacement Bulbs
- Watering Equipment
- Panels
- Water Pumps
- Squares
- Water Filtration
- 10-inch
- Safes
- Utility Room
- Featured Categories
- 12-Volt
- Privacy
- Miter Saw Stands
- Masks & Respirators
- Watches
- Home and Garden
- UK Electronics
- UK Books
- Health and Personal Care
- UK Sporting Goods
- Clothing, Shoes and Accessories
- Electronics, Gadgets and Computers
- CDs and Music Downloads
- UK Software and Video Games
- UK Toys and Games
- UK Home and Garden
- UK Video Games
- UK Baby Clothes and Accessories
- Books On
- German Electronics
Home DIY : Featured Categories : Power Tool Accessories : Burs
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials. DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
-
Champion Cutting Tool
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum
.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum
.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials. DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE: STANDARD CUT:
(STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shanks will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
-
Metal Removal
Rotary File Sets - Countersinks & Deburring Bur Type: Cylindrical, Ball, Cylindrical-Ball Nose, Egg, Round Tree, Tree-Pointed, Taper, Cone Cutter Diameter: 1/4 Number of Pieces: 8 Type of Cut: Double
-
Shark Industries
Shark Industries BT15
-
GROBET FILE CO. OF AMERICA, INC.
Dimensions shown are in the following sequence: Head diameter, head length, shank size. Lengths of shank will vary.
EXPLANATION OF DIFFERENT CUTS THAT ARE AVAILABLE:
STANDARD CUT: (STD) is most commonly used for general purpose deburring of steel, cast iron and other ferrous materials.
DOUBLE CUT: (DBL) is basically a standard cut tool, with cuts made on the left hand spiral. This design produces a finer finish on material and reduces the size of the chips and slivers. It also gives greater tool control.
BEAR BUR CUT (BB) is a double cut bur that was designed to substantially cut manufacturers production costs. The design and cut removes more material per hour, engineered for heavy duty applications, more durable due to the depth of the teeth, more resistant to chipping, wider teeth makes longer chips so it breaks up easier and the teeth profile is less prone to filling up with chips. Not to be used on aluminum
.
ALUMINUM CUT: (AC) is for use on aluminum, magnesium, soft steel and non-ferrous materials such as hard plastic, rubber and wood. The wide teeth configuration provides easy chip flow and faster stock removal with little or no clogging.
-
Shark Industries Ltd
Item #: SRKBT17.Features & Benefits:
Shark's Carbide Burs are an important piece to proper tire repair. Manufactured in the U.S.A., use these burs to remove damaged steel cables and loose wire in radial tires and for cleaning holes for patching.
- 1/2" Diameter
- 1" Flute Length
- 3" overall length
- Double Cut
Customers also search for: Tools and Storage\Abrasives\Grinding and Finishing\Grinding Burs Discount Carbide Bur 1/2" Shank, Buy Carbide Bur 1/2" Shank, Wholesale Carbide Bur 1/2" Shank, ToolWeb, Grinding Burs
-
Shark Industries Ltd
Features and Benefits:
Shark's Carbide Burs are an important piece to proper tire repair. Manufactured in the U.S.A., use these burs to remove damaged steel cables and loose wire in radial tires and for cleaning holes for patching.
- 1/2" Diameter
- 1" Flute Length
- 3" Overall length
- Aluma-Cut
-
Shark Industries Ltd
Features and Benefits:
Shark's Carbide Burs are an important piece to proper tire repair. Manufactured in the U.S.A., use these burs to remove damaged steel cables and loose wire in radial tires and for cleaning holes for patching.
- 1/2" Diameter
- 1/2" Flute Length
- 2-1/2" Overall length
- Aluma-Cut