Home DIY : Brands : Freud : Routers & Accessories : Router Bits : Door & Window Bits

• Home
• US Store
• Electronics
• Computers
• Sitemap

Home DIY : Brands : Freud : Routers & Accessories : Router Bits : Door & Window Bits

• Freud 97-210 3-Piece Cabinet Door Router Bit Set

  Freud

  
  
   

• Freud 99-050 1-1/2-Inch Window Sash and Rail End Router Bit

  Freud

  
  The Freud 1-1/2-Inch Window Sash and Rail End Router Bit copes the rails, sash bars and muntins to produce a complete divided light window sash. These bits feature a kickback reducing design for safety and are computer-balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 RPMs of most routers. For use on CNC and other automatic routers as well as hand-held and table-mounted portable routers, this bit cuts all composition materials, plywood, hardwood, and soft wood. These two bits are covered by Freud's limited lifetime warranty.
  
   

• Freud 99-051 1-11/32-Inch Window Sash Stile Router Bit

  Freud

  
  
   

• Freud 97-106 3 Piece Cabinet Door Router Bit Set with 99-566 Raised Panel Bit with Backcutter

  Freud

  
  
   

• Freud 99-260 1-11/16-Inch Matched Rail and Stile Bit Set

  Freud

  
  
   

• Freud 99-065 Finger Pull Door Lip Router Bit with 1/2-Inch Shank

  Freud

  
  Produces the finger pull groove found on popular contemporary cabinet doors. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on table-mounted portable routers.
  
   

• Freud 97-108 3 Piece Cabinet Door Router Bit Set with 99-569 Raised Panel Bit with Backcutter

  Freud

  
  
   

• Freud 99-322 Vertical Raised Panel Bit

  Freud

  
  Creates full sized raised panels by feeding the 3/4" stock vertically.Small overall diameter makes these bits ideal for lower horsepower routers and single speed routers. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on hand-held and table-mounted portable routers.
  
   

• Freud #99-291 1PC Rail/Stile Ogee Bit

  FREUD

  
  One Piece Rail & Stile Bit, Ogee Profile, 1/2 Shank, TiCo&tm. High Density Carbide.
  
   

• Freud 99-566 3-1/2-Inch Raised Panel Bit with Backcutters

  Freud

  
  
   

• Freud 99-515 3-1/2-Inch 2+2 Raised Panel Bit

  Freud

  
  
   

• Freud 97-208 3-Piece Door Set 99-261 99-569 (1/2-Inch Shank) W/Backcutter

  Freud

  
  
   

• Freud 99-266 Mini Rail & Stile Set 1/2-Inch Shank Ogee Profile

  Freud

  
  
   

• Freud 54-560 Replacement Backcutter for 99-566, 99-569, 99-571 Raised Panel Bits 15/64-Inch Carbide Height

  Freud

  
  Exclusive design combines the smooth cuts of our 2+2 Raised Panel bits with a backcutter to produce panels from 3/4" stock that are flush with the door frame for a professional look. Completed doors can be sanded with a wide belt sander or drum sander for easiest finishing. Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4" for maximum versatility and compatibility. Patent pending design allows these bits to produce a full 1 1/2" wide reveal for traditional raised panel doors. Included 99-562 radius backcutter gives a double sided appearance and can be replaced with the optional 99-560 square backcutter for a more contemporary look. Application: Cuts all composition materials, plywood, hardwood and soft wood. Use on table-mounted portable routers.
  
   

• Freud 99-293 9/32" Radius X 1-9/32" Height Classical Bead One-Piece Rrail and Stile Router Bit (1/2" Shank)

  Freud

  
  Cut the frame members face down on a 1/2" router and router table so variations in stock thickness are not a problem.99-290 produces a bead profile, 99-291 produces an ogee profile and 99-293 produces a classical bead profile.A simple, efficient method for creating beautiful cabinet doors, since it's not necessary to reconfigure or change cutters or fence settings. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on table-mounted portable routers.
  
   

• Freud 99-569 3-1/2-Inch Raised Panel Bit with Backcutters

  Freud

  
  3-1/2" Raised Panel Bit With Backcutter, Cove Profile, 1/2 Shank, TiCo&tm. High Density Carbide.
  
   

• Freud 99-060 Cove and Bead Router Bit for Rail and Stile Doors with 1/2-Inch Shank

  Freud

  
  Creates rail and stile doors that rival a professional's work.99-060 and 99-061 cope and stick the rail and stiles.99-060 and 99-061 can also be used alone to form a matching edge profile.99-062 cuts the panel slot and the back of the tongue on the coped piece. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on hand-held and table-mounted portable routers.
  
   

• Freud 99-263 1-11/16-Inch Matched Rail and Stile Bit Set with 3/4-Inch Carbide Height

  Freud

  
  
   

• Freud 99-318 Vertical Raised Panel Bit

  Freud

  
  Creates full sized raised panels by feeding the 3/4" stock vertically.Small overall diameter makes these bits ideal for lower horsepower routers and single speed routers. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on hand-held and table-mounted portable routers.
  
   

• Freud 99-571 2+2 Ogee Raised Panel Bit with Backcutters (1/2" Shank)

  Freud

  
  Exclusive design combines the smooth cuts of our 2+2 Raised Panel bits with a backcutter to produce panels from 3/4" stock that are flush with the door frame for a professional look.Completed doors can be sanded with a wide belt sander or drum sander for easiest finishing.Shims are included to allow adjustment of tongue thickness from 7/32" to 1/4" for maximum versatility and compatibility.Patent pending design allows these bits to produce a full 1 1/2" wide reveal for traditional raised panel doors.Included 54-562 radius backcutter gives a double sided appearance and can be replaced with the optional 54-560 square backcutter for a more contemporary look. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on table-mounted portable routers.