Shop Categories
- Circuit Breakers
- Chains & Security
- Blowers & Vacs
- One-Piece Rail & Stile Bits
- Kitchen Sink Faucets
- Number of Handles (feature_browse-bin)
- Roller Supports
- Doorknob Function (intended_use_browse-bin)
- Nippers & Snips
- 12" Blades
- Routers
- Refrigerator Filters
- Double Hung Windows
- Chisels
- For Do-It-Yourselfers
- Hand-Propelled
- Accessories
- Table Saw Blades
- Wall Lamps
- Multitools
- Skid-Steer Attachments
- Brands
- Lights
- Fan Lights
- Classical Cove Bits
- Watches
- Home and Garden
- UK Electronics
- UK Books
- Health and Personal Care
- UK Sporting Goods
- Clothing, Shoes and Accessories
- Electronics, Gadgets and Computers
- CDs and Music Downloads
- UK Software and Video Games
- UK Toys and Games
- UK Home and Garden
- UK Video Games
- UK Baby Clothes and Accessories
- Books On
- German Electronics
Home DIY : Featured Categories : Power Tool Accessories : Saw Accessories : Jigs
-
Kreg
Kreg's self-tapping screws were designed for its famous pocket-hole joinery, but that's not all they're good for. Kreg's self-tapping auger point eliminates time-consuming pre-drilling, and these screws are made from the highest quality steel, case-hardened and coated with a dri-lube finish. That means less driving torque for you. This coarse-thread screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine and pine. The washer head offers a great surface area to seat the screw firmly and helps prevent overdriving. They're on the spendy side, but the quality is worth it.--Kris Jensen-Van Heste
-
Kreg
-
Milescraft Inc.
The Milescraft Model 1407 D/TFeatherBoard has the dual slide motion and unique pre-load tension design features of the 1406 FeatherBoard and includes a sturdy spacer for tall stock cutting operations. The D/TFeatherBoard includes two 3/4-Inch and two 5/8-Inch miter bars as well as four T-Slot bolts allowing it to be used as either dual OR tandem feather boards in nearly any application on router tables and table or band saws.
-
Kreg
-
Grizzly
This fully adjustable Tenoning Jig fits left and right tilting table saws with 3/8" x 3/4" miter gauge slots while handling stock up to 31/4" thick. It has an adjustable guide bar for removing any loose play for precise results and two large grip handles for smooth control. The bevel angle is adjustable from 90° to 75° and the backstop is adjustable from 90° to 45°. The multi-position control levers and extra large clamping handwheel also ensure accurate and repeatable results. Additional assembly required for left tilting saws.
-
Porter Cable
The Porter-Cable 4212 dovetail jig is solid, durable and user-friendly with the ability to cut through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails, and dovetail dados. Built with a thick steel base and CNC machined aluminum templates, the 4212 performs with the consistent accuracy you expect from Porter-Cable. The jig comes fully assembled and includes two carbide-tipped bits, two template guides, two lock nuts, and a user guide.
-
General Tools
General Tools 888 Dowel PinsOur 8 Piece Dowel Center Set provides a quick and accurate method of transferring dowel hole locations from one wood piece to another. Simply place the appropriate size Dowel Center in the existing hole and press the board up to another wood piece. The set covers four popular dowel sizes and includes two Centers per size.General Tools 888 Dowel Pins Features:; For accurate match and transfer of dowel holes; Includes 2 of Each ?Çô 1/4?Ç¥, 5/16?Ç¥, 3/8?Ç¥ and 1/2?Ç¥; Made from nickel-plated steel; Instructions: 1. Insert Dowel Center into existing dowel hole. 2. Press board with dowel centers into second board to transfer dowel locations. 3. Centers will mark dowel locations on the second board for drilling.; For fast, easy, accurate doweling; Made of Brass-plated steel; The quickest and most accurate method to locate, transfer, and match dowel holes; 8 piece set includes two 1/4", two 5/16", two 3/8" and two 1/2" outside dimension dowel centers; Carded
-
Bench Dog
-
Wolfcraft
-
Jasper Tools
-
Milescraft Inc.
The Milescraft Model 1406 FeatherBoard features a dual slide motion design for quick and easy setup as well as a unique pre-load design that allows the appropriate amount of tension to be set consistently. The FeatherBoard includes 3/4-Inch and 5/8-Inch miter bars as well as T-Slot bolts allowing it to be used in nearly any application on router tables and table saws.
-
Incra
Add accuracy and precision to your jigs and fixtures with T-Track from Incra. These tracks are designed with a host of enhancements. Like other tracks, the extruded anodized aluminum construction is designed to house a 1/4"-20 bolt head, but thats where the similarity ends. First, these tracks feature a well in the extrusion allowing the track to be mounted using the included #8 pan head screws versus #6 flat head screws used by other tracks. The extra depth of the well allows the use of 1/4"-20 nuts that are not accommodated by other tracks. The T-Track is sized for a 3/4" wide opening.
-
Incra
Add accuracy and precision to your jigs and fixtures with T-Track from Incra. These tracks are designed with a host of enhancements. Like other tracks, the extruded anodized aluminum construction is designed to house a 1/4"-20 bolt head, but thats where the similarity ends. First, these tracks feature a well in the extrusion allowing the track to be mounted using the included #8 pan head screws versus #6 flat head screws used by other tracks. The extra depth of the well allows the use of 1/4"-20 nuts that are not accommodated by other tracks. The T-Track is sized for a 3/4" wide opening.
-
Kreg
-
Jasper Tools
-
Wolfcraft
-
Rockler
Table featherboard is ideal for use with any tool that has a standard 3/8" x 3/4" miter slot. Expandable miter track bars provide maximum holding power. 5" max. adjustability.
-
Incra
Eliminate the tedious process of making, fitting and adjusting the wooden runners on your sliding table saw jigs. Just screw these special extruded aluminum runners to your jigs and youre ready! Miter sliders have unique expansion mechanisms in their body that perfectly adjust to any standard 3/4" x 3/8" miter gauge slot. Each Slider includes plans for building a variety of table saw jigs.
-
Delta
When you need perfect, tight joints, the DELTA 34-184 Universal-Deluxe Tenoning Jig will give you professional results every time. The DELTA 34-184 is designed to work with any table saw with a 3/8-inch by 3/4-inch miter slot, standard on almost all table saws. It is made of durable, CNC precision milled cast iron, and can be used with both right and left tilt saws. The jig can be adjusted from 45 to 90 degrees with adjustable positive stops, and there's a micro-fine adjustment knob for fine width-of-cut settings down to 4/1000-inch. By pushing a button, you can make for macro adjustments.Unlike most jigs that require tools to make adjustments, the DELTA 34-184 features a large thumbscrew that allows for tool-less adjustments. With two ergonomic handles, you'll be able to make smooth cuts every time easily and comfortably. The jig handles up to 3-1/4-inch thick stock and features a quick-release hold down clamp for efficient work. The jig measures 11.8 x 12 x 8.2 inches and weighs 21.3 pounds.
-
Veritas
For anyone building rustic furniture, the Veritas aluminum-body tenon cutters will cut smooth, perfect tenons with radiused shoulders. Cutters are designed to run vibration free while being driven by an electric drill, yet still yield the same accuracy when used with a hand brace. The anodized body has been balanced to eliminate vibration and an integral level vial makes in-line cutting more accurate. To increase safety, the back end of the blade is contoured to avoid anything extending beyond the revolving aluminum body. The body has a built-in honing guide for easy sharpening of blades on a drill-press mounted drum sander. The blade is adjustable to cut the exact size of tenon required in both dry and green wood. Available in eight cutting diameters. Sizes 5/8" to 1" cut 2-3/4" long tenons and are typically used for most rustic furniture. Sizes 1-1/4" to 2" will cut 4-1/4" long tenons and are used for larger structural connections, such as bed frame to post, or fence rail to post. All sizes have hex shanks; sizes 5/8" to 1" are for use in an electric drill with a 3/8" (or larger) chuck. Sizes 1-1/4" to 2", which require more torque to drive, are for use in larger electric drills with a 1/2" (or larger) chuck. Not for use in a drill press.