Home DIY : Brands : Freud : Routers & Accessories : .50" Shank Bits

• Home
• US Store
• Electronics
• Computers
• Sitemap

Home DIY : Brands : Freud : Routers & Accessories : .50" Shank Bits

• Freud 97-210 3-Piece Cabinet Door Router Bit Set

  Freud

  
  
   

• Freud 42-116 Bearing Flush Trim Bit

  Freud

  
  1/2" Diameter x 2" Carbide Height, 2 Flute, Flush Trimming Router Bit, 1/2 Shank, TiCo&tm. High Density Carbide.
  
   

• Freud 82-112 3/16-Inch Radius Half Round Router Bit with 1/2-Inch Shank

  Freud

  
  Produces a fully rounded edge on dimensional lumbar. Creates an attractive half-round profile on furniture and mouldings. Guiding device must be used. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  
   

• Freud 32-524 1-3/8-Inch Rabbeting Bits with Bearing Set

  Freud

  
  
   

• Freud 42-114 Bearing Flush Trim Bit 1/2 Diameter, 1/2" shank with TiCo Hi-Density Carbide

  Freud

  
  1/2" Diameter x 1-1/2" Carbide Height, 2 Flute, Flush Trimming Router Bit, 1/2 Shank, TiCo&tm. High Density Carbide.
  
   

• Freud 40-114 45 Degree Chamfer Bit with 1/2-Inch Shank

  Freud

  
  45 Degree Chamfer Router Bit, 1/2 Shank, TiCo&tm. High Density Carbide.
  
   

• Freud 36-136 1-1/4-Inch Radius Beading Router Bit with 1/2-Inch Shank

  Freud

  
  Adds an attractive bead profile to furniture and millwork. Bearings can be equipped with a Freud 62-104 bearing for rounding over work. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on hand-held and table-mounted portable routers.
  
   

• Freud 20-112 1-Inch Diameter 90-Degree V-Grooving Router Bit with 1/2-Inch Shank

  Freud

  
  Allows you to cut deep or shallow "V" grooves. Ideal for making signs and adding decorative accents to furniture and plaques. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  
   

• Freud 99-050 1-1/2-Inch Window Sash and Rail End Router Bit

  Freud

  
  The Freud 1-1/2-Inch Window Sash and Rail End Router Bit copes the rails, sash bars and muntins to produce a complete divided light window sash. These bits feature a kickback reducing design for safety and are computer-balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 RPMs of most routers. For use on CNC and other automatic routers as well as hand-held and table-mounted portable routers, this bit cuts all composition materials, plywood, hardwood, and soft wood. These two bits are covered by Freud's limited lifetime warranty.
  
   

• Freud 18-114 1/4-Inch Diameter Round Nose Router Bit with 1/2-Inch Shank

  Freud

  
  Provides a perfect radius groove every time. Produces several different styles of fluted millwork. Ideal for making signs or cutting decorative designs in cabinet doors. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  
   

• Freud 99-322 Vertical Raised Panel Bit

  Freud

  
  Creates full sized raised panels by feeding the 3/4" stock vertically.Small overall diameter makes these bits ideal for lower horsepower routers and single speed routers. Application: Cuts all composition materials, plywood, hardwood and soft wood.Use on hand-held and table-mounted portable routers.
  
   

• Freud 12-108 3/8-Inch Diameter by 1-Inch Double Flute Straight Router Bit with 1/2-Inch Shank

  Freud

  
  Precise hook angle. End of bit allows for fast plunging. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  
   

• Freud 12-178 1-1/8-Inch Diameter by 1-1/2-Inch Double Flute Straight Router Bit with 1/2-Inch Shank

  Freud

  
  Precise hook angle. End of bit allows for fast plunging. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  
   

• Freud 99-266 Mini Rail & Stile Set 1/2-Inch Shank Ogee Profile

  Freud

  
  
   

• Freud 99-029 1/4-Inch Fluting Router Bit with Double Ball Bearing with 1/2-Inch Shank

  Freud

  
  Double bearings on these bits create fluted chair legs and mouldings.Ideal for the production of Chippendale style chairs and tables. Application: Cuts all composition materials, plywood, hardwood, and soft wood.Use on hand-held and table-mounted portable routers.
  
   

• Freud 12-152 3/4-Inch Diameter by 1-Inch Double Flute Straight Router Bit with 1/2-Inch Shank

  Freud

  
  Precise hook angle. End of bit allows for fast plunging. Application: Cuts all composition materials, plywood, hardwood, and soft wood. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
  
   

• Freud 22-134 3/4-Inch Diameter 14-Degree Dovetail Router Bit with 1/2-Inch Shank

  Freud

  
  
   

• Freud 99-051 1-11/32-Inch Window Sash Stile Router Bit

  Freud

  
  
   

• Freud 60-102 5/16-Inch Slot Cutter Arbor with 1/2-Inch Shank

  Freud

  
  1/2" Shank Arbor, For Use With Slot Cutters.
  
   

• Freud 99-034 2-3/4-Inch Lock Miter Bit

  Freud